Search found 481 matches: +voltage +safety

Return to advanced search

Re: How would you go about stepping up dc power supply volta

... not clear in your post that the ebay power supplies were adjustable in voltage - that does change things. That said, a 10 kV DC output supply can't ... remember, when you open the supply in that manner you are on your own - safety is a very important issue and when the system is at a higher voltage ...
by Dennis P Brown
Tue Apr 18, 2017 10:56 am
 
Forum: New User Chat Area
Topic: How would you go about stepping up dc power supply voltage?
Replies: 17
Views: 392

Re: How would you go about stepping up dc power supply volta

... think you are completely off base with the idea of upping the output voltage from a supply. I also think your observation of 600W or more of output ... be attempted by anyone who lacks good engineering skills or HV safety concepts. So -- maybe. But not easily if at all.
by Rex Allers
Tue Apr 18, 2017 2:40 am
 
Forum: New User Chat Area
Topic: How would you go about stepping up dc power supply voltage?
Replies: 17
Views: 392

Re: The Beginnings of a Fusor Electrical System

... can be much greater than the normal continuous current.) Of course, the voltage limit of the diode should be around twice the fusor max voltage (remember ... occurs quickly and then makes these voltages deadly. Follow HV safety procedures (i.e. one rule is: always assume any source is hot and ...
by Dennis P Brown
Thu Mar 30, 2017 11:04 am
 
Forum: High Voltage - Fusor Input Power (& FAQs)
Topic: The Beginnings of a Fusor Electrical System
Replies: 38
Views: 2374

Re: John Beutz Fusor... The Story so Far

I have stressed electrical safety but one needs to be aware that over 35 kV fusor operation x-rays start to be ... GM tube would be an ideal and very low cost approach - just remember to lower the voltage on the Ludlum unit for GM tube operation. So besides electrical safety, radiation ...
by Dennis P Brown
Mon Mar 20, 2017 9:20 am
 
Forum: Images du Jour
Topic: John Beutz Fusor... The Story so Far
Replies: 25
Views: 1054

Re: John Beutz Fusor... The Story so Far

... - I know this only too well. My main concern is and remains the high voltage x-former. You need to devote a lot of time both reading up on these ... before ever applying voltage to that 100 kV x-former; first, for safety reasons but also, if you burn out that x-former, or design/install ...
by Dennis P Brown
Sun Mar 19, 2017 6:10 pm
 
Forum: Images du Jour
Topic: John Beutz Fusor... The Story so Far
Replies: 25
Views: 1054

Re: John Beutz Fusor... The Story so Far

... area that can cause issues for pro's. If that x-former can reach such voltages you are in an area of voltage technology few venture and those that ... expensive. One does not want to blow those so care is not just about safety. Cables and connectors are extremely hard to find and new ones are ...
by Dennis P Brown
Sat Mar 18, 2017 5:01 pm
 
Forum: Images du Jour
Topic: John Beutz Fusor... The Story so Far
Replies: 25
Views: 1054

Re: Mech Pump and Transformer Questions

... BF3 tube from the Ukraine - I got one and it worked fine but my working voltage was too high for my Ludlum so I built my own power system. However, ... design/system when the x-former was hot. Speaking of fusor electrical safety, your list should include confirming that you have a good ground point ...
by Dennis P Brown
Sat Mar 18, 2017 3:22 pm
 
Forum: New User Chat Area
Topic: Mech Pump and Transformer Questions
Replies: 20
Views: 590

FAQ - Voltage-Cross section-Current

... each other. Cross section is a variable totally dependent on applied voltage. The "fusion cross section" is a probabilty that in a uniformly ... will require significant electrical or electronics skills. High voltage safety becomes of paramount importance to avoid being killed or injured ...
by Richard Hull
Mon Mar 06, 2017 4:06 pm
 
Forum: FAQs: Fusion and Fusor Theory
Topic: FAQ - Voltage-Cross section-Current
Replies: 1
Views: 384

Re: Problem with Canberra Series 30

Ok, I solved the problem, I'm just stupid. To give the supply voltage in the safety, at the instrument under test, I use a 230/230 isolation transformer and a variac with ...
by dario_tortato
Sun Feb 12, 2017 3:54 pm
 
Forum: Neutrons, Radiation, and Detection (& FAQs)
Topic: Problem with Canberra Series 30
Replies: 26
Views: 2698

Re: Plasmagun/railgun for Stelarate

... rod) with a fairly high current (proper gauge) well insulated (for the voltage) wire connected from that tip to a ground (the same used for the ... without first checking them with the ground stick. Another important safety issue - caps that are rapidly discharged can over heat and explode. ...
by Dennis P Brown
Mon Feb 06, 2017 12:14 pm
 
Forum: Ion Gun Design and Construction (& FAQs)
Topic: Plasmagun/railgun for Stelarate
Replies: 31
Views: 1804
Next

Return to advanced search