Re: Identify these flange types?

Every fusor and fusion system seems to need a vacuum. This area is for detailed discussion of vacuum systems, materials, gauging, etc. related to fusor or fusion research.
Post Reply
Andrew Seltzman
Posts: 810
Joined: Sun Feb 01, 2004 8:02 pm
Real name: Andrew Seltzman
Contact:
Contact Andrew Seltzman

Re: Identify these flange types?

Post by Andrew Seltzman »

I think these are ASA flanges, especialy the large one. The large one looks like the 8" outer diameter 4 bolt type, the smaller one also looks like an ASA flange. These are common on diffusion pumps (especially varian), and should have an oring groove in one of the 2 flanges.

Andrew Seltzman
www.rtftechnologies.org
Andrew Seltzman
www.rtftechnologies.org
Top
Post Reply

Return to “Vacuum Technology (& FAQs)”