Multiplier build for HV supply

[John Futter]

I was asked by PM to divulge how I did my 160kV supply
so here it is.
Note that I place the main transformer half way up the stack so the transformer secondary is 40kV away from earth and under transformer oil.
So the total supplies are two 80kV multipliers one positive and one negative

Protel Schematic2.pdf

(27.28 KiB) Downloaded 522 times

X-rays are emitted to the bottom of the pic (dark patch)oil tank not shown
and main transformer is fitted in photo but filament transformers can not be seen as they are to the back of the photo