AC Flyback Half Bridge Help

This forum is for specialized infomation important to the construction and safe operation of the high voltage electrical supplies and related circuitry needed for fusor operation.
Post Reply
Arden
Posts: 1
Joined: Fri Jun 30, 2017 4:46 am
Real name: Arden

AC Flyback Half Bridge Help

Post by Arden »

So I just wound an ac flyback. No issues there. I put the coil on the ferrite (From TV flyback) and when I hooked it up to do a lv test run before oil immersion I got nothing. It's like it has no resonant frequency. I adjusted the half bridge frequency from its lowest to its highest (30khz to around 250khz) with no output. Not even a hiss. I have no idea what is wrong. Any help would be appreciated.
John Futter
Posts: 1848
Joined: Wed Apr 21, 2004 10:29 pm
Real name: John Futter
Contact:

Re: AC Flyback Half Bridge Help

Post by John Futter »

Arden
This is not the introduce yourself forum
Please correct-- as per fusor net rules
And of course your real full name as per the rules not just Arden
Post Reply

Return to “High Voltage - Fusor Input Power (& FAQs)”