Jerry,
And what about using glass? Pyrex?
I was told by someone who repairs ion sources that quartz is not the best material as it breaks after some time
due to ion bombardment and several other effects. But most of the HF sources use a kind of glass cylinder.
Think about the Helicon devices! Teflon is also used as a window between the microwave source and the vacuum chamber in such sources.
end-hall ion source
- Werner Engel
- Posts: 145
- Joined: Sun Aug 18, 2013 11:51 am
- Real name: Werner Engel
- Location: Vienna, Austria
- Contact:
-
- Posts: 276
- Joined: Mon Feb 07, 2011 4:08 pm
- Real name: Jeroen Vriesman
- Location: Netherlands
- Contact:
Re: end-hall ion source
Jerry, another option is nickel plating the iron parts.
http://www.nickelinstitute.org/~/Media/ ... 141015.pdf
http://www.nickelinstitute.org/~/Media/ ... 141015.pdf
-
- Posts: 975
- Joined: Tue Nov 24, 2009 3:08 am
- Real name:
- Location: Beaverton, OR
Re: end-hall ion source
The end hall or gridded sourced if IAEBD are a bit different than the kind of sources you are talking about. These are almost all metal and provide ions to create better and more durable coatings in a e-beam system. The can also be used to clean parts before coating as well as use the ion beam to sputter parts.Werner Engel wrote:Jerry,
And what about using glass? Pyrex?
I was told by someone who repairs ion sources that quartz is not the best material as it breaks after some time
due to ion bombardment and several other effects. But most of the HF sources use a kind of glass cylinder.
Think about the Helicon devices! Teflon is also used as a window between the microwave source and the vacuum chamber in such sources.
Intlvac has really nice cutaway drawings of their Veeco/Commonwealth clones. http://www.intlvac.com/parts
-
- Posts: 975
- Joined: Tue Nov 24, 2009 3:08 am
- Real name:
- Location: Beaverton, OR
Re: end-hall ion source
Yeah, I was thinking about that last night. I might go in that direction.Jeroen Vriesman wrote:Jerry, another option is nickel plating the iron parts.
http://www.nickelinstitute.org/~/Media/ ... 141015.pdf
-
- Posts: 810
- Joined: Sun Feb 01, 2004 8:02 pm
- Real name: Andrew Seltzman
- Contact:
Re: end-hall ion source
410 stainless is good for use in a vacuum and is magnetic. I have successfully used it on my anode layer ion sources.
viewtopic.php?f=12&t=5011&start=40
You can buy it from mcmaster as round barstock and machine it out.
viewtopic.php?f=12&t=5011&start=40
You can buy it from mcmaster as round barstock and machine it out.
Andrew Seltzman
www.rtftechnologies.org
www.rtftechnologies.org
-
- Posts: 975
- Joined: Tue Nov 24, 2009 3:08 am
- Real name:
- Location: Beaverton, OR
Re: end-hall ion source
I need a pretty big ion source for my chamber, possibly a 5cm one, the od on that one is about 5.5". That would be a nightmare to make out of solid.Andrew Seltzman wrote:410 stainless is good for use in a vacuum and is magnetic. I have successfully used it on my anode layer ion sources.
viewtopic.php?f=12&t=5011&start=40
You can buy it from mcmaster as round barstock and machine it out.
Probably the easiest thing is 410 sheet and then roll and weld. I am pretty sure thats how they are making them. I think I saw a seam in one pic.