A theory of a possible method of fusion

It may be difficult to separate "theory" from "application," but let''s see if this helps facilitate the discussion.
User avatar
Richard Hull
Site Admin
Posts: 10810
Joined: Fri Jun 15, 2001 1:44 pm
Real name: Richard Hull

Re: A theory of a possible method of fusion

Post by Richard Hull » Sun May 27, 2018 7:38 pm

We humans are big bags of water.... we are water logged meat engines. The micro wave oven frequency was tuned for cooking wet meat and other water loaded food substances. Our bodies like to fully absorb 2.45 Ghz RF energy and fast neutrons. Your health, your choce!

Richard Hull
Progress may have been a good thing once, but it just went on too long. - Yogi Berra
Fusion is the energy of the future....and it always will be
Retired now...Doing only what I want and not what I should...every day is a saturday.

steventw
Posts: 22
Joined: Fri Jan 24, 2014 1:45 pm
Real name: Steven Whittam
Location: Melbourne/Australia

Re: A theory of a possible method of fusion

Post by steventw » Sun May 27, 2018 10:38 pm

Guess I’ll stick with the 2 copper wires
Thanks for advice

steventw
Posts: 22
Joined: Fri Jan 24, 2014 1:45 pm
Real name: Steven Whittam
Location: Melbourne/Australia

Re: A theory of a possible method of fusion

Post by steventw » Tue Jul 10, 2018 10:19 pm

Just in case missed post in contsrructor thread

Ok my idea that I’ve worked with I’ve simplified a little
For proof of concept I’ll be using 2 rows of magnets
Roughly 10 each side with like poles facing centre so that there pushin away
From what I’ve seen in vids on YouTube is plasma spinning around magnets so idea is to give it a run up or hopefully sling shot around as it moves down row of magnets toward centre
Videos I looked at for magnets plasma that came up in YouTube search
https://youtu.be/2B-lKgcQJvg
And https://youtu.be/uPU9cEK5YsM

If magnets rows fixed down and are facing the like poles / repelling Poles
Plasma spinning from one row would be spinning opposite direction to other row and hopefully meet somewhere in middle
FA764497-C969-4E0D-88D7-31C54A0BC79D.jpeg
FA764497-C969-4E0D-88D7-31C54A0BC79D.jpeg (35.64 KiB) Viewed 116 times
If plasma gets a speed boost from spinning around magents on lead up
Might lower power requirements for fusion


If all works as theorised when build proof will upgrade proof to a prototype with rows on all 6 sides of square
8F148BFD-456E-4F4B-9560-F9C5CAEEF944.jpeg
8F148BFD-456E-4F4B-9560-F9C5CAEEF944.jpeg (33.57 KiB) Viewed 116 times


From Steven Whittam

Post Reply