Re: Fusor Capacitance

It may be difficult to separate "theory" from "application," but let''s see if this helps facilitate the discussion.
Post Reply
guest

Re: Fusor Capacitance

Post by guest »

Can you explain what you mean by "sheet" capacitance?

Lee
User avatar
Richard Hull
Moderator
Posts: 14991
Joined: Fri Jun 15, 2001 9:44 am
Real name: Richard Hull

Re: Fusor Capacitance

Post by Richard Hull »

This is an old concept and is part of electrostatic theory.

Basically, If you make a hollow chicken wire sphere (or geodesic) of some size whereby the holes are a small enough fraction of the sphere's surface area the device has the same isotropic capacitance as that of a perfectly smooth and solid sphere. At some further point of closure of the holes, the field about the hollow wire sphere will also be close to having no detectable field irregularities over that of the solid ball either.

With the inner grid of a fusor, we are, capacitively, close to a perfect solid ball but no where near a smoothed out field near the surface.

Richard Hull
Progress may have been a good thing once, but it just went on too long. - Yogi Berra
Fusion is the energy of the future....and it always will be
The more complex the idea put forward by the poor amateur, the more likely it will never see embodiment
Post Reply

Return to “Fusor and/or General Fusion Theory (& FAQs)”