“Magnetically insulated grid IEC”

This forum is for other possible methods for fusion such as Sonolumenescense, Cold Fusion, CANR/LENR or accelerator fusion. It should contain all theory, discussions and even construction and URLs related to "other than fusor, fusion".
User avatar
Dennis P Brown
Posts: 1540
Joined: Sun May 20, 2012 2:46 pm
Real name: Dennis P Brown
Location: Glen Arm, MD

Re: “Magnetically insulated grid IEC”

Post by Dennis P Brown » Tue Nov 06, 2018 11:22 am

Science, unlike wallstreet, isn't based on promises - it is experimentally proven and being empirical, one can easily determine whether something that is being promised to work will likely so work. This will not. If one wants to spend money for wishful thinking - again, that is wallstreet and while the odds are against you to make any real money long term, it can be done because other people like you, are just as gullible - that is the bread and butter of the investment houses that churn stocks.)

Any one claiming they will produce economic thermonuclear fusion in a few years is either misleading (best case) or lying (most likely case) to you because it will not work.

User avatar
Richard Hull
Site Admin
Posts: 10936
Joined: Fri Jun 15, 2001 1:44 pm
Real name: Richard Hull

Re: “Magnetically insulated grid IEC”

Post by Richard Hull » Thu Nov 08, 2018 4:40 am

Apologies to all who posted on page 4. In trying to erase all references to the PM that was posted. The deletions and responses were also emptied. I have spent 15 minutes cleaning up the mess. Prior to this, I have had no issues with simple deletions of single postings found undesirable. I do not know what happened here. Sorry again to all who posted and responded on this page whose posts are lost.

Again, no personal messages sent to any member may be posted or shared with the other forum members without the full permission of both correspondents. I would have thought this would have been self-evident. Now, it is the official rule of this site.

Richard Hull
Progress may have been a good thing once, but it just went on too long. - Yogi Berra
Fusion is the energy of the future....and it always will be
Retired now...Doing only what I want and not what I should...every day is a saturday.

tannerhorne
Posts: 16
Joined: Fri May 04, 2018 2:17 pm
Real name: Tanner Horne

Re: “Magnetically insulated grid IEC”

Post by tannerhorne » Fri Nov 09, 2018 12:54 am

Thanks Richard! It is very much appreciated.

I am happy to entertain public questions again if there are any.

User avatar
Dennis P Brown
Posts: 1540
Joined: Sun May 20, 2012 2:46 pm
Real name: Dennis P Brown
Location: Glen Arm, MD

Re: “Magnetically insulated grid IEC”

Post by Dennis P Brown » Fri Nov 09, 2018 12:24 pm

While my post was hard, I am not happy when someone makes claim's that they have discovered a breakthrough in fusion (net energy) without peer-reviewed proof nor at least some research that demonstrates they are doing something that is, at the very least, based on known physics relative to that goal. I have not seen that post or is it on another thread?

That all said, I should clarify that I do feel that your efforts to attack this issue - to do some type of fusion - is an honest attempt and is a worthy goal. Also, I do think you deserve support from people that clearly realize your odds of success of ever making even a watt of electricity from fusion is extremely unlikely. However, maybe you will beat the record for a fusor? That might be possible. Or even do just some interesting work. Either way, I do hope to see your project progress and that you continue to post here. Also, I do honestly hope you achieve some success and get a device working.

As Richard says - build it and show results. It appears you are trying, so, you deserve support here at the forum in your attempt. Just best not to promise any electricity ;) .

tannerhorne
Posts: 16
Joined: Fri May 04, 2018 2:17 pm
Real name: Tanner Horne

Re: “Magnetically insulated grid IEC”

Post by tannerhorne » Fri Nov 09, 2018 6:28 pm

Dennis,

Thanks for the post and comments. I want to clarify that no where do we claim any breakthrough other than a fully functional superconducting research device, and now on to a second generation superconducting IEC research device. Though no publications on the first device, it is built! You can clearly see it in operation from the video, and you can go see it in person on public display. What other company does that? :) We will publish after validation and full field in 2019.

The point of the vouchers was to be in the place of a t-shirt for fundraising, our end goal is energy production so I thought if there was ever success that would be a nice way to support the project. Buy a voucher now, and if we are successful get a check in the mail at current electricity prices, otherwise a donation.

Our only goal is energy production and on that front we are also now a member of the Fusion Industry Association: https://www.fusionindustryassociation.org/members

It is attempting the unlikely as you all know, but there is no longer the luxury of not having fusion for energy production. It simply must happen. Someone must be successful and we are going to do whatever it takes.

User avatar
Dennis P Brown
Posts: 1540
Joined: Sun May 20, 2012 2:46 pm
Real name: Dennis P Brown
Location: Glen Arm, MD

Re: “Magnetically insulated grid IEC”

Post by Dennis P Brown » Sat Nov 10, 2018 9:54 am

A suggestion - since your device is on-view, why not post pictures of the apparatus with some details and descriptions.

Then, I would think posting details (general) of your approach and how you believe your design will improve upon fusor performance would both better support your ideas and provide readers some understanding of your approach.

tannerhorne
Posts: 16
Joined: Fri May 04, 2018 2:17 pm
Real name: Tanner Horne

Re: “Magnetically insulated grid IEC”

Post by tannerhorne » Mon Nov 12, 2018 3:31 am

Sure I can do that. The best pictures and description are on the website, but I will draw on a few to make it easier to see what is happening and post them when I get a minute.

Post Reply