These three images show the bulk of the fusor III setup. The power supply controller is to the extreme left (barely in image). The x-ray supply is behind the danger high voltage sign below as well as the vacuum pump.
Two neutron counters of the BF3 type are seen to the left and right of the fusor chamber.
The video camera is positioned just to the right of the chamber and the image of the poissor displayed on the monitor in the upper right of the image. The small, homemade Lucite cased gieger counter in the foreground is used to sniff out x-radiation leaks.
The gas handling system is on the wall to the rear and the pressure gauge is just above on the wall.
The voltage and current digital indicators are just below the monitor self.
Richard Hull
Archived - Hull Fusor III setup
- Richard Hull
- Moderator
- Posts: 14992
- Joined: Fri Jun 15, 2001 9:44 am
- Real name: Richard Hull
Archived - Hull Fusor III setup
Progress may have been a good thing once, but it just went on too long. - Yogi Berra
Fusion is the energy of the future....and it always will be
The more complex the idea put forward by the poor amateur, the more likely it will never see embodiment
Fusion is the energy of the future....and it always will be
The more complex the idea put forward by the poor amateur, the more likely it will never see embodiment