Archived - Vacuum pump system and chamber

Current images of fusor efforts, components, etc. Try to continuously update from your name, a current photo using edit function. Title post with your name once only. Change image and text as needed. See first posting for details.
Post Reply
henryhallam
Posts: 73
Joined: Wed Feb 04, 2004 6:11 pm
Real name:
Contact:

Archived - Vacuum pump system and chamber

Post by henryhallam » Fri Sep 24, 2004 11:26 pm

Here's a photo of my new (to me) vacuum system - an Speedivac single stage rotary backing an Edwards diff pump to get down to about 2E-6 Torr, without any baking out.

More details and photos on my website: http://henryhallam.cjb.net/fusor/



Edit: 6th Oct 2004
Our chamber has finally arrived from the welder's! Looks like he did a good job although we won't know until it's pumped down.
It consists of two 8" hemispheres with 10" ISO flanges, and four 2.75" conflat half-nipples attached. One will be used for the viewport and the other three are spare, for future experimentation with ion guns, filaments etc. There is a 50kV-rated feedthrough permanently welded at the top.

Fergus picked it up this morning and I have cleaned it but haven't yet tightened the conflat bolts.
Question: How critical is the tightening? Do I need to buy a torque wrench?



Click here for more photos (high res)

Post Reply