Gas Fittings Basics

Members may post files they wish to share here.
Post Reply
Tom McCarthy
Posts: 404
Joined: Wed May 08, 2013 7:36 pm
Real name: Tom McCarthy
Location: Ireland
Contact:

Gas Fittings Basics

Post by Tom McCarthy » Thu Jul 21, 2016 6:54 pm

Was having some trouble figuring out details of the Fusor's gas line. Physics at University of Utah provide some good resources that I found particularly helpful.

Basic Concepts of plumbing is a good intro to basic terminology, with a few Google searches to accompany it - attached.

Vacuum Tech Fundamentals is also a wide-ranging reference document, it's actually the Leybold Vacuum reference manual - http://www.physics.utah.edu/Phys5719/Va ... entals.pdf

Much more to be found at - http://www.physics.utah.edu/Phys5719/

Tom
BasicConcepts.ppt
(848.5 KiB) Downloaded 125 times

User avatar
Jason C Wells
Posts: 113
Joined: Sun Oct 20, 2013 11:11 pm
Real name: Jason C Wells

Re: Gas Fittings Basics

Post by Jason C Wells » Sun Jul 24, 2016 3:38 am

I concur with the PPT recommendation to use Swagelok. I doubly concur that one should use their stainless fittings. The brass ones are too soft and no matter how careful I was I ended up over tightening them when I had to disconnect and reconnect lines.

Post Reply