Page 1 of 1

Vacuum General Info

Posted: Mon May 15, 2017 9:32 pm
by Tom McCarthy
Does anybody have any information on the company Vacuum General? In particular mass flow controller data sheets. I can't find a thing online.

Tom

Re: Vacuum General Info

Posted: Mon May 15, 2017 10:26 pm
by Jim Stead
Vacuum General was acquired by Tylan (Tylan General), which was later acquired by Mykrolis. You might find info under the other company names. Which MFC do you need data for?

Re: Vacuum General Info

Posted: Tue May 16, 2017 11:22 am
by Tom McCarthy
Cheers Jim - I'm looking for information on model FV6-11. Has a D-sub connector.

I'll have a look at Tylan/Millipore models wih d-sub connections, they may have inherited Vacuum General pinouts.

Tom

Re: Vacuum General Info

Posted: Tue May 16, 2017 2:34 pm
by Jim Stead
Tom, this image is reported to be of an FV6-41. https://www.artisantg.com/itemimages/VG ... _View3.jpg
Being from the same series, there's a good chance this is the same on yours. Maybe comparing some of the wiring inside would help confirm that.

Re: Vacuum General Info

Posted: Wed May 17, 2017 2:09 pm
by Tom McCarthy
Great, thanks for that. I've also got the seller to send me a copy of the pinout that he found and will compare. Betting they'll match.

Thanks Jim!

Tom

Re: Vacuum General Info

Posted: Fri May 19, 2017 10:12 pm
by Richard Hull
Question?

Why was this not in the vacuum forum?

This forum is for the originator of the first post to drop a useful file into that post.

No questioning posts should ever appear here.

I am the garbage man and will delete this entire thread soon

Richard Hull

Re: Vacuum General Info

Posted: Sat May 20, 2017 12:18 pm
by Tom McCarthy
My bad. I thought it was appropriate as a data sheet/file was the desired response.

Tom