Check out
http://www.wagnercompanies.com/spheres_ ... heres.aspx
A lot of folks seem frozen and refuse to do any searching at all. The above is where a large fraction of all of the successful fusioneers obtained their chamber spherical shell bodies.
6" 304 SS hemispheres will require 8" conflat rings with the standard 6" lipped inner diameter. These conflat rings are TIG welded to the hemispheres and the halves are then drilled and ports welded on as needed. The two halves are then bolted together using a copper sealing gasket to complete the sphere and the fusor chamber.
Note: This is not the only way to make a fusor as noted in many posting here. However, for those wanting this form of fusor, the above URL is a reliable source for good hemispheres.
Richard Hull
FAQ - 304 Stainless hemispheres for fusor shell
- Richard Hull
- Moderator
- Posts: 15037
- Joined: Fri Jun 15, 2001 9:44 am
- Real name: Richard Hull
FAQ - 304 Stainless hemispheres for fusor shell
Progress may have been a good thing once, but it just went on too long. - Yogi Berra
Fusion is the energy of the future....and it always will be
The more complex the idea put forward by the poor amateur, the more likely it will never see embodiment
Fusion is the energy of the future....and it always will be
The more complex the idea put forward by the poor amateur, the more likely it will never see embodiment
-
- Posts: 3
- Joined: Wed Oct 28, 2015 7:12 pm
- Real name: David Granger
Re: FAQ - 304 Stainless hemispheres for fusor shell
Is stainless steel advantageous over other materials? I notice that supplier also has hemispheres of brass, aluminum and ...other non stainless steel. Is the choice of stainless just because its easier to weld, or is the added strength/corrosion resistance important?
- Richard Hull
- Moderator
- Posts: 15037
- Joined: Fri Jun 15, 2001 9:44 am
- Real name: Richard Hull
Re: FAQ - 304 Stainless hemispheres for fusor shell
All of this is answered many times in the forums. Stainless is the best material due to virtually any criterion you might choose. As noted, it need not be spherical.
Richard Hull
Richard Hull
Progress may have been a good thing once, but it just went on too long. - Yogi Berra
Fusion is the energy of the future....and it always will be
The more complex the idea put forward by the poor amateur, the more likely it will never see embodiment
Fusion is the energy of the future....and it always will be
The more complex the idea put forward by the poor amateur, the more likely it will never see embodiment