FAQ - Operational maxims for a fusor

If you have a question about this topic, the answer is probably in here!
Post Reply
User avatar
Richard Hull
Site Admin
Posts: 10908
Joined: Fri Jun 15, 2001 1:44 pm
Real name: Richard Hull

FAQ - Operational maxims for a fusor

Post by Richard Hull » Tue Feb 25, 2014 8:15 pm

Remember these key maxims...........

1. Obtain the highest running or acceleratory applied voltage as possible! (This means an ever greater probability that fusion will actually occur)
2. Obtain the highest running current possible! ( current determines the number of charged current elements, deuterons, that are fusion-ready)
3. Obtain the highest deuterium running pressure that you can! (This means there is more nuclear fusion fuel in the chamber to do fusion with!)

As you might expect, they are all mutually interacting in a very complex manner. For more detailed info on each go to the following three FAQs:

viewtopic.php?f=29&t=4843

viewtopic.php?f=29&t=9171

viewtopic.php?f=25&t=9173


Richard Hull
Progress may have been a good thing once, but it just went on too long. - Yogi Berra
Fusion is the energy of the future....and it always will be
Retired now...Doing only what I want and not what I should...every day is a saturday.

Calmarius
Posts: 17
Joined: Tue Apr 08, 2014 8:19 pm
Real name: Dávid C

Re: FAQ - Operational maxims for a fusor

Post by Calmarius » Thu May 01, 2014 10:57 pm

Does the 2nd and 3rd links are the same on purpose?

User avatar
Richard Hull
Site Admin
Posts: 10908
Joined: Fri Jun 15, 2001 1:44 pm
Real name: Richard Hull

Re: FAQ - Operational maxims for a fusor

Post by Richard Hull » Fri May 02, 2014 3:14 pm

Corrected to include pressure info.

Richard Hull
Progress may have been a good thing once, but it just went on too long. - Yogi Berra
Fusion is the energy of the future....and it always will be
Retired now...Doing only what I want and not what I should...every day is a saturday.

Post Reply