Hi All
My name is Brent Lockhart and I would like to take this opportunity to introduce myself to the Fusor community as a new forum member. I am looking forward to learning from the large volumes of existing information on the site and keeping up with the latest advancements from the members. I have begun to assemble my initial IEC device and will update the design an components in the near future.
Cheers
Brent Lockhart
Larkspur, CO 80118
Hello from Colorado
-
- Posts: 4
- Joined: Sun Feb 05, 2017 6:44 pm
- Real name: Brent Lockhart
-
- Posts: 4
- Joined: Sun Feb 05, 2017 6:44 pm
- Real name: Brent Lockhart
Re: Hello from Colorado
Here is a short description of the basic equipment I have obtained and will be utilizing in the fusor experiments:
Roughing pump - Leybold Trivac A series dual rotary vane pump.
Turbomolecular pump - Pfeiffer HiPace80
Display Control Unit - Pfeiffer DCU 110
Control Unit - Pfeiffer TPU 110
Vent Valve - Pfeiffer TVF 005
Vacuum Gauge - Pfeiffer TPG 261
Vacuum Recorder Unit - Pfeiffer TPG 261
Electrical System - -35KV DC
Electrical Feedthrough - Ceramtec 50 KV
Grid - Tungsten and Titanium
Radiation Detectors - RAP -640 CsI (Tl) -Gamma
- Gamma Spectacular GS Neutron
- GS 1100 Pro
- KNK 53M B10 Neutron Detector (long term project)
Moderators - 2 inch HDPE sheet stack
- 1 Kg D2O
Fuel - 50 Liter lecture bottle 99.99% D2
Mass Flow and needle valve system
Detectors - Hydrogen
Flush Lines - 99.99 % He
More to come as I work the kinks out of the basic set-up (the devil is always in the details!!)
Roughing pump - Leybold Trivac A series dual rotary vane pump.
Turbomolecular pump - Pfeiffer HiPace80
Display Control Unit - Pfeiffer DCU 110
Control Unit - Pfeiffer TPU 110
Vent Valve - Pfeiffer TVF 005
Vacuum Gauge - Pfeiffer TPG 261
Vacuum Recorder Unit - Pfeiffer TPG 261
Electrical System - -35KV DC
Electrical Feedthrough - Ceramtec 50 KV
Grid - Tungsten and Titanium
Radiation Detectors - RAP -640 CsI (Tl) -Gamma
- Gamma Spectacular GS Neutron
- GS 1100 Pro
- KNK 53M B10 Neutron Detector (long term project)
Moderators - 2 inch HDPE sheet stack
- 1 Kg D2O
Fuel - 50 Liter lecture bottle 99.99% D2
Mass Flow and needle valve system
Detectors - Hydrogen
Flush Lines - 99.99 % He
More to come as I work the kinks out of the basic set-up (the devil is always in the details!!)
- Dennis P Brown
- Posts: 3159
- Joined: Sun May 20, 2012 10:46 am
- Real name: Dennis Brown
Re: Hello from Colorado
Welcome and you have a lot of nice equipment. Best of luck with your project.