ISO160 Gate Valve

For posts specifically relating to fusor design, construction, and operation.
Post Reply
David Kunkle
Posts: 284
Joined: Thu Apr 17, 2014 12:43 pm
Real name: David Kunkle

ISO160 Gate Valve

Post by David Kunkle »

My turbo uses ISO160 connection to the chamber. In need of a gate valve now and found this on ebay:

http://www.ebay.com/itm/C96023-Varian-1 ... 5afce07c58

It states "160mm A/O VGA160IM " Just want to make sure this fits before I buy it because it doesn't actually specify ISO160. Looks like the right size and bolt pattern. Though it took me a while to figure out that I just need to ditch the lower part of the claw clamps and thread the bolts into the valve on both sides. Duh. I do want a manual valve. Thanks for any info.
If your experiment needs statistics, you ought to have done a better experiment.

Ernest Rutherford
DonaldE
Posts: 4
Joined: Fri Oct 09, 2015 3:49 am
Real name: Donald Ernest
Location: United States
Contact:

Re: ISO160 Gate Valve

Post by DonaldE »

That's really impressive. thanks for sharing it here
Post Reply

Return to “Fusor Construction & Operation (& FAQs)”