How to get power to inner grid?

For posts specifically relating to fusor design, construction, and operation.
Post Reply
Junaid Abdurahman
Posts: 6
Joined: Wed Mar 02, 2016 2:20 pm
Real name: Junaid Abdurahman

How to get power to inner grid?

Post by Junaid Abdurahman »

Im using thick steel wire as my inner grid (unable to get tungsten) and a steel pipe as the outer grid with two thick polycarbonate windows on each end. I wanted to know how I can get power to the inner grid since the heat would easily melt the polycarbonate. I was thinking of having a layer of sand with super glue or something between the the wire coming from the inner grid to outside the Fusor. Any suggestions on better solutions?
Post Reply

Return to “Fusor Construction & Operation (& FAQs)”