Page 1 of 2

Re: Couple of questions

Posted: Tue Jul 10, 2018 5:11 am
by steventw
This video pritty interesting too

https://youtu.be/uPU9cEK5YsM

Guess nere end he doing something similar to what I am
Trying 2 magnets with like poles facing I recon
Similar to what I’m doing
Problem with that is the bolt used to hold them probly mangantised

Re: Couple of questions

Posted: Mon Jul 16, 2018 1:25 pm
by Dennis P Brown
Spell check is your friend; best to avoid posting via cell phones.

Re: Couple of questions

Posted: Thu Jul 19, 2018 7:54 pm
by steventw
Tend to use phone these days more than pc
My pc I’m sure is compromised cause when I boot windows and logg in it brings up a command prompt instead of desktop

Good thing I know to type “explorer” to boot desktop 🤨

Re: Couple of questions

Posted: Thu Jul 19, 2018 11:58 pm
by steventw
Here’s design I did today with measurements
Dad hopefully going to build housing when has some spair time at work
395D256C-66CC-4E10-8280-CF2EE8EA9164.jpeg

Re: Couple of questions

Posted: Fri Jul 20, 2018 3:24 am
by Dennis P Brown
OK; virus protection software can be your friend. Also, in the control panel, the System and Security menu has a sub-menu that has tools that are very useful for checking for errors and other problems with the computer (of course, do update to the latest version of "Explorer" and download all required MS system updates should be second nature.)

If you have backup your computer a "Mirror Image" of your system & files before it was compromised, then rebuild with that; if not unlikely you can save your data.

Then if your system has a really bad viruses that these anti-virus software programs can't remove, then your most likely recourse is do a restore to "Factory Settings" and then rebuild your system and re-install all updates - of course, this means the complete loss of all data files but that is the price one pays if they get a nasty virus and do not keep a "Mirror Image" of their computer system & data on hand.

Re: Couple of questions

Posted: Sat Aug 11, 2018 12:42 am
by steventw
Built housing for magnets and almost done
Hopen to test this arvo

Re: Couple of questions

Posted: Sat Aug 11, 2018 1:48 am
by steventw
C19F2E6C-B425-438B-9A3E-C8A72FB0FCAE.jpeg
Here’s the proof of concept
Just have to finish wireing for copper coils to create plasma

Prob be a few weeks till have time to finish

Re: Couple of questions

Posted: Mon Aug 13, 2018 3:02 am
by steventw
Ok gave it a go
But no plasma was being created and wasn’t drawing any amps
Theory’s anyone

Re: Couple of questions

Posted: Mon Aug 13, 2018 9:53 pm
by MatthewL
What was your pressure?

Re: Couple of questions

Posted: Tue Aug 14, 2018 1:52 am
by steventw
-20psi

Tho thinking 30V 10A not enough from reading I’ve done today on forums
Also read need to ground positive side not negative

Maybe need to adjust how I’m trying to create the plasma
Only copper wire can get around here has the enamel coating.

Only need to create a small stream of plasma at base if magnets to see how it reacts with the magnets

At moment got a positive ring and negative ring at base of each magnets where is attached to frame

Is there maybe an easier way to create the plasma

Re: Couple of questions

Posted: Tue Aug 14, 2018 4:01 am
by steventw
Ok older bro had a smart idea of usen tig welder
Just borrowed cable from another welder so got a pos and neg cable
Tho had taken off the copper grids trying to get a spark between the wires
So will have to rebuild that part another day
But works got a good spark going
Just need to get it back to what it was to create some plasma
Prob be a few days

Re: Couple of questions

Posted: Tue Aug 14, 2018 12:42 pm
by Dennis P Brown
You will not create a plasma in air just applying a welder to those "electrodes". Also, a new picture would be helpful of the setup; also, maybe define what you are using for electrodes in the current setup.

Re: Couple of questions

Posted: Tue Aug 14, 2018 8:08 pm
by steventw
I got a vacuum chamber and pump
And a bit of copper wire

Not 100% what to use for electrodes

Was just planning on wireing up the copper wire into a couple of rings with a small gap away from each other

Will get a few pics of finished setup up if get into work today to finish

Here’s a pic again of frame for magnets
Will be putting copper wire at base of magnets where zip ties are
066E8A5A-16AE-42DB-9F61-35A51A6809D1.jpeg

Re: Couple of questions

Posted: Tue Aug 14, 2018 9:34 pm
by steventw
Here’s finish

Going to soldier wires on then give it a go
145E911B-00F0-4495-912F-4B5D0258DF12.jpeg

Re: Couple of questions

Posted: Tue Aug 14, 2018 11:25 pm
by MatthewL
How have electrically insulated what looks like the electrodes? It seems like they are connected by the aluminum frame. What is the goal here? Obviously fusion can't happen in 20 psi oxygen/nitrogen. Is this just to observe effects of plasma in the magnetic field? Are you planning on putting it under vacuum?

Re: Couple of questions

Posted: Thu Aug 16, 2018 10:20 am
by steventw
Well seen video of plasma being created nere a magnet on YouTube and plasma spinning around magnet which seems to be moving
Idea was to have plasma spin up from both sides because magnets have the like pole which repels/pushing away so in theory plasmas would be going different direction spinning around till met in Center and because magnets are close enough that there pushing away from each other hence why’s had them bolted down or would wana spin and attracted , broke one and damaged another putting it together anyway
wondering if it’s done the correct way with right gases might make fusion
I did see a video once that mentioned hydrogen and boron gas? , when fuse create alpha waves they turn into dc current when hit sertain metals apparenely
I did book mark but got made privateon youtube

Anyway taking a break
Imploded my vac chamber kinda
When I was lowering pressure noticed I hadn’t put lid in a safe position
And when got to -20 psi side that wasn’t over enough slipped, damaged the frame magnets where on.
F7DD1F91-4F7A-4E57-84A4-BF9208340269.jpeg

Re: Couple of questions

Posted: Wed Sep 19, 2018 10:09 pm
by steventw
Older bro managed to fix my vacuum chamber and prototype

I’m thinking of getting a 8kV neon transformer.
Would that be good enough for creating plasma.
Also if anyone could explain to me how to set it up inside vacuum chamber to make the plasma would appreciate.
Am a total newbie when comes to making plasma.

Re: Couple of questions

Posted: Thu Sep 20, 2018 1:16 pm
by Dennis P Brown
A 8 kV neon sign transformer (NST) will certainly create a plasma, even an atmospheric one depending on separation between the electrodes. But at lower pressure the plasma gets larger.

There are more ways to make a plasma than there are books, papers or even ideas on the subject. One method is just mount two nails using plastic posts (the posts will insulate the nails from the local area.) Have the nail points face one another with a short gap of 3-5 mm. Hook up a wire from each nail (using a clip) to each pole of the NST. Using a variac, turn up the applied voltage to the NST. At some point, the air will break down and you will have a local plasma in the air across the short gap between the nail points.

One does a similar process in a vacuum chamber but a cathode and anode (for direct current: i.e. the transformer has a diode or diode bridge) are often fairly large and separated by many centimeters because from 0.1 torr and 1 torr, it is very easy to 'strike' and maintain a very large plasma.

There are many posts of people doing this using "demo fusors". Look those up and see their pictures - it is very easy.

Aside: The pot you are using is very weak for any real vacuum work. Also, one makes the cover large enough so it can't enter into the 'chamber'. Don't cut the plexglass to just fit. Make the cover a few centimeters larger than the chamber lip.

Re: Couple of questions

Posted: Fri Sep 21, 2018 2:49 am
by steventw
hi

well i bort the vacuum chamber with lid off the net. so didnt have part in making the lid,
its a bit larger than vacuum chamber, just didnt have it on center when it imploded

Re: Couple of questions

Posted: Mon Oct 22, 2018 5:18 am
by steventw
Fixed prototype and vacuum chamber
And ordered a 8kV. Neon transformer
So hopefully get it in a few weeks and can start experiement again