How Have You Guys Made Your Inner Grids?

For Short Term Learning Discussions ONLY. This area is for CURSORY questions and connecting with other users ONLY. ALL technical contributions need to be made in the appropriate forums and NOT HERE. All posts are temporary and will be deleted within weeks or months. You should have already search the extensive FAQs in each of the forums before posting here as your question may already be answered.
Post Reply
Duncan Wilkie
Posts: 31
Joined: Fri Dec 25, 2015 1:55 am
Real name: Duncan Wilkie

How Have You Guys Made Your Inner Grids?

Post by Duncan Wilkie » Sun May 13, 2018 10:31 pm

Perhaps the best way to figure out my own construction issues is to ask how the pros do it. I haven't had much luck finding information on the weldability/brazeability of pure tungsten to itself and stainless on the internet, so I thought I'd ask how you guys constructed grids.
Some say the glass is half full. Others see it as half empty. I say it is twice as big as it needs to be.

Tom McCarthy
Posts: 404
Joined: Wed May 08, 2013 7:36 pm
Real name: Tom McCarthy
Location: Ireland
Contact:

Re: How Have You Guys Made Your Inner Grids?

Post by Tom McCarthy » Sun May 13, 2018 11:18 pm

Comprehensive post on inner grid construction without any welding/brazing etc.

viewtopic.php?f=6&t=2706&p=16310

ian_krase
Posts: 453
Joined: Mon Nov 28, 2016 7:48 am
Real name: Ian Krase

Re: How Have You Guys Made Your Inner Grids?

Post by ian_krase » Mon May 14, 2018 6:42 am

For those not making seamless grids, tungsten can be bonded to itself and to stainless steel by spot welding.
Attachments
IMG_20180210_231753.jpg
IMG_20180213_020123.jpg

prestonbarrows
Posts: 211
Joined: Sun Jun 24, 2012 5:27 am
Real name:

Re: How Have You Guys Made Your Inner Grids?

Post by prestonbarrows » Sat May 19, 2018 5:44 am

Tungsten filament (from mcmaster or other places) is simple enough to hand fabricate for mid-performance grids.
2π in θ at r=1, rotate π/2 in φ, 9/4π in θ at r=1,rotate π/2 in φ, 2π in φ at r=1.

Easy for r> ~0.5 inches. You should end up with two flying leads you can spin together on the main stalk to your feedthrough.

Post Reply