We are building a fusor reactor and were looking for a fine, high vacuum needle valve for our deuterium system. We need something that can control a flow rate of about 0-1000 sccm. Additionally, our copper tube leading in and out of the needle valve will have an outer diameter of 1/8". If anyone has information on a product like this for less than or about $200 please contact me.
I was looking at something like this,
https://www.chell.co.uk/phpmedia/docs/c ... -sheet.pdf
But let me know if you have any better ideas.
Use this forum to offer / scavenge for fusor parts
1 post • Page 1 of 1