Interesting
anyone got a pentawatt laser lying around
http://phys.org/news/2014-12-world-comp ... tml#ajTabs
lesser particle power might be achievable with a nitrogen laser like the one published years ago using pcb board material
New tabletop particle accelerator
-
- Posts: 1850
- Joined: Wed Apr 21, 2004 10:29 pm
- Real name: John Futter
- Contact:
- Richard Hull
- Moderator
- Posts: 15027
- Joined: Fri Jun 15, 2001 9:44 am
- Real name: Richard Hull
Re: New tabletop particle accelerator
Sure! Table top accelerator...Giant, aircraft hanger sized laser....The ultimate in compact accelerator systems.
Richard Hull
Richard Hull
Progress may have been a good thing once, but it just went on too long. - Yogi Berra
Fusion is the energy of the future....and it always will be
The more complex the idea put forward by the poor amateur, the more likely it will never see embodiment
Fusion is the energy of the future....and it always will be
The more complex the idea put forward by the poor amateur, the more likely it will never see embodiment
-
- Posts: 3
- Joined: Fri Jan 02, 2015 2:06 am
- Real name: Glen Milton
- Location: Brooklyn, NY
- Contact:
Re: New tabletop particle accelerator
Never seen this before. Amazing.
-
- Posts: 211
- Joined: Sun Jun 24, 2012 1:27 am
- Real name:
Re: New tabletop particle accelerator
Still a bit smaller than the 5 square kilometers or so needed for a comparable booster ring. Blame the click-bait writing usually found on Phys-org...Richard Hull wrote:Sure! Table top accelerator...Giant, aircraft hanger sized laser....The ultimate in compact accelerator systems.
Richard Hull
-
- Posts: 1519
- Joined: Thu Jul 05, 2001 12:07 am
- Real name:
Re: New tabletop particle accelerator
The petawatt lasers are extremely small compared to the monster in Livermore - their high wattage is derived from extremely short pulse width (femtoseconds), generated by a big table full of expensive optics using frequency chirp/pulse compression techniques. The Ti-sapphire laser that drives the mess ain't all that cheap either.
As an aside, one research team is trying to put together a system with extremely high peak power in order to observe vacuum breakdown.
As an aside, one research team is trying to put together a system with extremely high peak power in order to observe vacuum breakdown.
-
- Posts: 1519
- Joined: Thu Jul 05, 2001 12:07 am
- Real name:
Re: New tabletop particle accelerator
Here's the reference to vacuum breakdown and other experiments contemplated for ultrashort pulse high-intensity lasers. Vacuum breakdown was mentioned as far back as the early 70's - laser technology is finally getting to the point where it's capable - a matter of finesse rather than brute power/energy (take that, Livermore).
http://www.laserfocusworld.com/articles ... acuum.html
http://www.laserfocusworld.com/articles ... acuum.html
- Werner Engel
- Posts: 145
- Joined: Sun Aug 18, 2013 11:51 am
- Real name: Werner Engel
- Location: Vienna, Austria
- Contact:
Re: New tabletop particle accelerator
I just went through the laserfocusworld article you mentioned and also browsed through the ELI website:
It might be true; generating extremly high field intensities has to be tested once. But I see several Inhibitors there: The countries where they do want to build these devices are not famous for turning every € the receive from the EU into science - they are more known for corruption and private benefits hidden behind governmental decisions.
This seems to be truer, as all these facilities are still in the process of planning and buildings - since 2011!
On the other hand, ITER was not planned to be built in a day either …
I whish them good luck!
It might be true; generating extremly high field intensities has to be tested once. But I see several Inhibitors there: The countries where they do want to build these devices are not famous for turning every € the receive from the EU into science - they are more known for corruption and private benefits hidden behind governmental decisions.
This seems to be truer, as all these facilities are still in the process of planning and buildings - since 2011!
On the other hand, ITER was not planned to be built in a day either …
I whish them good luck!