Demo fusor build 2.0

For posts specifically relating to fusor design, construction, and operation.
Post Reply
JoeBallantyne
Posts: 327
Joined: Tue Jul 20, 2010 4:08 pm
Real name: Joe Ballantyne
Location: Redmond, WA

Re: Demo fusor build 2.0

Post by JoeBallantyne »

You might consider putting a piece of sacrificial glass inside the chamber in front of your very nice large viewport. So that if you get a jet that ends up pointing at the viewport you don't end up cracking it and ruining it. You wouldn't be the first to lose one due to localized heating from a jet.

Better to break a cheap piece of glass in front of it, than a very expensive to replace vacuum viewport.

Also, if you just try your first name followed by last name, that won't fit as a username? (ie: drop your middle name and the spaces)

I suspect it might work OK.

Joe.
Post Reply

Return to “Fusor Construction & Operation (& FAQs)”